This equipment main structure isthe screw, which increases gradually along the material residue outlet direction while the screw pitch reduces gradually. When the materials are pushed in by the screw, due to screw cavity volume reduce, thus the material to be extracted.
When you add raw material into material feeding hopper, which under screw pressure, and the extracted juices will flow into the juice container through the filter screen, and the waste materials will be discharged through the ring interval formed between the screw and the pressure adjusting conical part.You can adjust the gap size by adjusting the pressure head which move toward the axial direction, thus to adjust the juice extracting rate.
1.Material contact part use high quality stainless steel, which meet national sanitarystandards;
2.Reasonable structure design, easy operation, and convenient to install and maintenance;
3.It is widely used in different field and flexible to adjust.
|
Model Type
|
LZ-0.5
|
LZ-1.5
|
|
Power（Kw）
|
1.5
|
4
|
|
Capacity（T/h）
|
0.5
|
1.5
|
|
Outer size
|
1100x265x920
|
1560x450x1340
|
